Application Scenarios Of Titanium Plates
At room temperature, titanium is stable in the air; because titanium has low density and high strength, its density is only half of that of steel, but its strength is similar to that of steel, and it has excellent properties such as high temperature resistance, low temperature resistance, and corrosion resistance. The strength of titanium alloy is higher than that of steel. Titanium is known as "space metal", and it can maintain high strength and mechanical properties in a wide temperature range such as -253 ° C ~ 500 ° C. Titanium is also known as "biophilic metal". In the bone damage, fix it with titanium splint and titanium bone screw. After a few months, the bone will grow on the titanium splint and the thread of the titanium bone screw, and the new muscle will be wrapped on the titanium splint. This kind of " "Titanium bone" is just like real bone, and can even be replaced by artificial bone made of titanium to treat fractures.
Features of Gr1 Gr2 Gr3 Gr4 Titanium Plates
1. The oxide film on the surface of the titanium seed plate is equivalent to a good long-lasting wear-resistant hair separator. The use of the titanium seed plate saves the separator, makes the plate peeling easy, and eliminates the process of pre-treatment of the seed plate. The board is half lighter than the copper seed board.
2. The service life of the titanium seed plate is more than 3 times that of the copper seed plate, and it can reach 10 to 20 years according to the operating conditions
3. The electrolytic copper prepared with titanium seed plate has dense crystal structure, smooth surface and excellent quality.
4. Since the titanium seed plate does not need to be coated with a separating agent, the pollution of the copper electrolyte can be avoided.
5. Increase the production capacity and reduce the production cost of electrolytic copper, so as to have better economic benefits.
Titanium is an alloying element of steel (ferrotitanium). Titanium will reduce the grain size of steel. At the same time, titanium as a deoxidizer will reduce the oxygen content of the steel; adding titanium to stainless steel will reduce the carbon content. Titanium is often alloyed with other metals such as aluminum (improved grain size), vanadium, copper (hardened), magnesium, and molybdenum. Titanium mechanical products (sheets, plates, tubes, wires, forgings, castings) have applications in industry, aerospace, leisure and emerging markets.
Gr1 Gr2 Gr3 Gr4 titanium plates are used in a variety of sporting goods: tennis rackets, golf club heads, lacrosse stick handles; helmet guards for cricket, hockey, lacrosse and football; Skeletons and Components. Although titanium is not a mainstream material for bicycle production, there are still sportsmen and cycling adventure enthusiasts who use titanium bicycles. Titanium alloys are also used to make eyeglass frames, which can be a bit expensive, but are lightweight, durable, and don't cause skin irritation. Many backcountry backpackers have titanium gear, including cooking utensils, cutlery, lanterns and tent stakes. While slightly more expensive than their traditional steel or aluminum counterparts, these titanium pieces are much lighter without sacrificing strength. Farriers also prefer titanium because titanium horseshoes are lighter and more durable than steel.
