A New Journey For Melting Plant
In the scorching summer on the occasion of the Dragon Boat Festival, the melting Workshop No. 2 of the melting factory has also received a good news. The melting indicator light of the fifth set of 12-ton vacuum self-consumption furnace is flapping and shining like the hot sun, symbolizing that the five sets of vacuum self-consumption furnace have been equipped with melting conditions.
Equipment installation began on February 11. The first furnace was released on March 23, and the first 12 tons of ingots were cast in the melting plant; On June 1, the last furnace completed melting, XRUN created multiple device installation records.
We broke the record for the most equipment installed at one time (five sets of double-burner double-station vacuum consumable furnaces were installed at one time), the record for the fastest installation of the main body of the equipment, and the record for the fastest equipment debugging.
Looking back on the entire installation process, it was full of challenges and overcame various difficulties. Of course, I gained a lot of experience and learned a lot of equipment knowledge. Recalling the excitement when the main body of the first furnace equipment was installed, I completely forgot about the air leakage in the workshop.
Harsh installation environment. One can recall the unparalleled pride of the on-site personnel assisting in the installation of the equipment when the first ingot was smelted. Looking at the high-quality ingots coming out of the oven is like a fine work of art. Recalling the various problems encountered in the process of equipment installation and commissioning, the various matters discussed in the meeting, the various difficulties encountered during on-site implementation, and the various problems finally solved with the best solution will be valuable in the future career. experience of.
Through the deployment of installation, commissioning, production, and training at the same time, the on-site personnel perform their duties and cooperate with each other. While assisting in the installation of equipment, work overtime to meet the requirements of debugging equipment. Cooperate closely with equipment manufacturers to speed up the process of equipment installation and commissioning. With the aggravation of production tasks, operators were dispatched on site to complete the necessary production arrangements, and in the case of a shortage of personnel, the basic requirements of producing one ingot per day were achieved. With the gradual increase of new employees, we have used our spare time to conduct on-site explanations and practical training for many times, and have achieved considerable results.
The new factory has a new look, we have enough passion to write a more gorgeous chapter. The new factory has a new atmosphere, and we have enough passion to meet the challenges of tomorrow.
